DMM

DMM IMP Brass Nut - Soldered Micro Nut for Thin Cracks (Singles & Sets)

£21.95 GBP

~~£24.00 GBP~~ £21.95 GBP

W promocji

Z wliczonymi podatkami. Koszt wysyłki obliczony przy realizacji zakupu.

Size 1 (Blue) 2 (Red) 3 (Silver) 4 (Purple) 5 (Green) Set 2-4 Set 1-5

The DMM IMP Brass Nut is built for the thinnest, most marginal placements on hard trad routes, where a steel or alloy wire simply won't seat. Soft brass heads bite into the rock and resist pulling through, and every size is certified to EN 12270 and UIAA 124.

Unlike most micro nuts, the IMP head is soldered onto the wire rather than swaged around it. That allows a thicker wire and a stronger nut for its size. One side of the wire is free to slide, so the IMP self-equalises as it loads, and the colour-coded swage makes it quick to grab the right size from your harness. Buy single sizes to fill gaps on your rack, or a set of 2-4 or 1-5.

Product Details

Size 1 (Blue): 4.0-5.6mm range, 4kN, 4g
Size 2 (Red): 4.8-6.4mm range, 5kN, 8g
Size 3 (Silver): 6.4-7.9mm range, 5kN, 10g
Size 4 (Purple): 7.9-9.5mm range, 7kN, 13g
Size 5 (Green): 9.5-11.7mm range, 7kN, 16g
Set 2-4: 31g. Set 1-5: 51g
Standards: EN 12270:2013, UIAA 124

Why you'll love it

Brass heads – soft enough to bite into tiny, flared placements
Soldered construction – a thicker, stronger wire than a swaged micro nut
Self-equalising – one side of the wire slides to share the load
Colour-coded – quick size selection on the lead

Good to know

Micro nuts hold far less than standard nuts – check the rating for each size and place them with care
Brass is soft: inspect heads for deformation after a fall or a hard extraction
Choose singles (sizes 1-5) or sets 2-4 and 1-5
DMM stock codes A1721A-A1725A, A1722/24A, A1721/25A
Read and follow DMM's instructions before use