Inkl. Steuern.
Versand wird beim Checkout berechnet
Anzahl
Verfügbarkeit für Abholungen konnte nicht geladen werden
The DMM IMP Brass Nut is built for the thinnest, most marginal placements on hard trad routes, where a steel or alloy wire simply won't seat. Soft brass heads bite into the rock and resist pulling through, and every size is certified to EN 12270 and UIAA 124.
Unlike most micro nuts, the IMP head is soldered onto the wire rather than swaged around it. That allows a thicker wire and a stronger nut for its size. One side of the wire is free to slide, so the IMP self-equalises as it loads, and the colour-coded swage makes it quick to grab the right size from your harness. Buy single sizes to fill gaps on your rack, or a set of 2-4 or 1-5.
Product Details
Size 1 (Blue): 4.0-5.6mm range, 4kN, 4g
Size 2 (Red): 4.8-6.4mm range, 5kN, 8g
Size 3 (Silver): 6.4-7.9mm range, 5kN, 10g
Size 4 (Purple): 7.9-9.5mm range, 7kN, 13g
Size 5 (Green): 9.5-11.7mm range, 7kN, 16g
Set 2-4: 31g. Set 1-5: 51g
Standards: EN 12270:2013, UIAA 124
Why you'll love it
Brass heads – soft enough to bite into tiny, flared placements
Soldered construction – a thicker, stronger wire than a swaged micro nut
Self-equalising – one side of the wire slides to share the load
Colour-coded – quick size selection on the lead
Good to know
Micro nuts hold far less than standard nuts – check the rating for each size and place them with care
Brass is soft: inspect heads for deformation after a fall or a hard extraction
Wenn du dich für eine Auswahl entscheidest, wird die Seite komplett aktualisiert.
Wird in einem neuen Fenster geöffnet.
PayPal Pay Later Messaging
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
