Inkl. Steuern.
Versand wird beim Checkout berechnet
Anzahl
Verfügbarkeit für Abholungen konnte nicht geladen werden
DMM's Dynatec 11mm Dyneema Slings are light, strong sewn slings rated to 22kN, in colour-coded lengths from 30cm to 240cm. Dyneema has a higher strength-to-weight ratio than nylon webbing, resists UV and abrasion better, and absorbs far less water – an important consideration for winter climbing.
The 11mm width is a good middle ground: slim enough to thread narrow constrictions and sit well on marginal spikes, but a little easier to handle than the skinniest slings. Use the 30cm and 60cm lengths for threads and extending placements to cut rope drag, the 120cm for building anchors and slinging blocks, and the 240cm for big features, trees and equalised belays. Each length has its own colour so you can grab the right one from your rack.
Product Details
Material: Dyneema / Dynatec
Width: 11mm
Strength: 22kN
Standards: EN 566:2017, EN 354:2010, EN 795:2012 B, UIAA 104
Lengths and weights
Length
Colours
Weight
30cm
Green
12g
60cm
Gold, Orange, Purple
26g
120cm
Grey, Lime, Red
48g
240cm
Blue, Green
95g
Why you'll love it
Strong and light – 22kN at every length
Low water absorption – Dyneema stays useful in wet and winter conditions
Abrasion and UV resistant – outlasts comparable nylon webbing
Colour-coded lengths – grab the right sling at a glance
Good to know
Choose your length and colour from the options above
Certified to EN 566:2017, EN 354:2010, EN 795:2012 B and UIAA 104
Dyneema has very low stretch and can be damaged by heat, sharp edges and abrasion. Avoid shock loading, inspect before use and follow DMM instructions.
Who it's for
Trad, alpine, multi-pitch and winter climbers who want light, durable slings for threads, extensions, anchors and slinging features in line with manufacturer guidance.
Wenn du dich für eine Auswahl entscheidest, wird die Seite komplett aktualisiert.
Wird in einem neuen Fenster geöffnet.
PayPal Pay Later Messaging
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.